PA12-CF

  • PA12-CF carbon fiber nylon 12
  • PA12-CF carbon fiber nylon 12
  • PA12-CF carbon fiber nylon 12
PA12-CF carbon fiber nylon 12PA12-CF carbon fiber nylon 12PA12-CF carbon fiber nylon 12

PA12-CF carbon fiber nylon 12

  • Material: Nylon PA12 CF
  • Diameter:1.75mm
  • Printing Temp.:280-300℃
  • Bed Temp.:40~70℃
  • Description: EasePA12-CF is specially developed for FDM 3D printing process. The base material is made of long chain molecules of nylon 12, which has the characteristics of low moisture absorption, high strength,
  • INQUIRY   EMAIL

1.SPECIFICATIONS.jpg

PA12-CF is specially developed for FDM 3D printing process. The base material is made of  long chain molecules of nylon 12, which has the characteristics of low moisture absorption, high strength, high wear resistance, excellent chemical resistance and high heat resistance. The printing process has good dimensional stability, no warping and no shrinkage, and can be used together with our easy-to-peel support material to solve the problem of poor molding effect of complex model support surface.

CHARACTERISTIC

Intelligent fiber reinforcement technology

The dispersion and distribution of the reinforced fibers in the material matrix are controlled by the production process, so that the reinforced fibers form a network skeleton structure in the material and bear most of the load transmitted by the material matrix. We use SFR technology to greatly improve the mechanical properties and heat resistance of the material, and release the internal stress in the printing process by strengthening the fiber network structure, and the printed piece has good dimensional stability and no warpage problem.

Ultra low humidity sensitivity

PA12-CF base material uses long chain molecules of nylon 12, the saturated moisture absorption rate is only one tenth of that of ordinary PA6, completely solve the defects of nylon material mechanical properties and dimensional stability change greatly before and after absorption. Super wear resistance and a low friction coefficient, self-lubrication, and excellent wear resistance. Easy to implement all kinds of high-strength gear and wear requirements of industrial applications.

The lowest density

PA12-CF is one of the lowest-density FDM industrial-grade printing materials, which can easily achieve high strength and lightweight requirements for industrial applications.

Super wear resistance

PA12-CF has a low friction coefficient, self-lubrication, and excellent wear resistance. Easy to implement all kinds of high-strength gear and wear requirements of industrial applications.

Other Suggestions:

1. Nylon material is very easy to absorb moisture in the environment, and there will be wire drawing, extrusion bubbles and other phenomena after hygroscopic printing, reducing the quality of printing. It is recommended that you put the wire into the drying box immediately after opening the package (humidity controlled below 15%) for printing. Unused wires should be put back into their original packaging bags and sealed for storage.

2. After the material is damp, there will be an increase in printing wire drawing, extrusion bubbles, rough printing surface quality, and other phenomena. Please dry the wire in the oven at 80-100℃ for 4-6h to restore the printing quality.

3. It is recommended to choose hardened steel and above-grade nozzle, which can effectively improve the printing quality. It is recommended that the thickness of the heating block is not less than 12mm.

4. After printing, the printed pieces can be annealed to further improve their strength of the printed pieces. Conditions of return: it can be taken out after placed at 80-100℃ for 4-8 hours.


6.Certificates melovy3d.jpg

10. Email us now.jpg

Inquiry:

CONTACT US

Contact: Cynthia Melovy

Phone: +8618036081380

Tel: +86-512-65808834

Email: info@melovy3d.com

Add: No.68, NanTiancheng Road, New High-speed Railway City, Xiangcheng Dist., Suzhou,CN